Curious...what inside blade mounts to 440?
See a 1010 with inside mount out for parts..will that fit ?
Also what all does the 62 blade fit??
1010 inside mount blade
-
Stan Disbrow
- 350 crawler
- Posts: 2983
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: 1010 inside mount blade
Hi,
Referencing the old WetWare here....
The 62 fits the 420 and 430.
The 63 is the 62 replacement for the 440 - different crossbars so the 62 won't fit the 440.
The 64 is the PAT blade for the 440.
The 1010 sees things change again and so a new set of blades, which I don't recall the model numbers of.
Stan
Referencing the old WetWare here....
The 62 fits the 420 and 430.
The 63 is the 62 replacement for the 440 - different crossbars so the 62 won't fit the 440.
The 64 is the PAT blade for the 440.
The 1010 sees things change again and so a new set of blades, which I don't recall the model numbers of.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (5045D), 2025 3025E
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (5045D), 2025 3025E
Re: 1010 inside mount blade
are the center frames marked by number?..how know which is which..book?
-
jimmydiesel
- 440 crawler
- Posts: 180
- Joined: Tue Oct 26, 2021 10:23 am
- Location: North Central Washington
Re: 1010 inside mount blade
The 6 way hydraulic blade for a 1010 is a 612. It is similar to a 64. It will not just swap over to a 440. Can it be made to work ???
I was planing to do this swap but found a 440 with the 64 so never started the change.
I was planing to do this swap but found a 440 with the 64 so never started the change.
440 ICD 602 Blade 3Pt.hitch.
440 ICD 602 Blade Gearmatic winch.
440 ICD 64 6 way Blade Carco winch
440 ICD 831 Loader
440IC 831 Loader
1010c Diesel 612 6 Way Blade
North Central Washington State
440 ICD 602 Blade Gearmatic winch.
440 ICD 64 6 way Blade Carco winch
440 ICD 831 Loader
440IC 831 Loader
1010c Diesel 612 6 Way Blade
North Central Washington State
-
Stan Disbrow
- 350 crawler
- Posts: 2983
- Joined: Fri Jul 15, 2005 3:13 pm
- Location: Raleigh, NC
Re: 1010 inside mount blade
Hi,
I seem to recall different diameters of the cross bars as well as square ones vs round ones. So, some work needed there to cross fit stuff. And, are there differences in the overall widths and lengths between the various models of blade frames?
I've always just went with the concept that none of these cross fit.
Stan
I seem to recall different diameters of the cross bars as well as square ones vs round ones. So, some work needed there to cross fit stuff. And, are there differences in the overall widths and lengths between the various models of blade frames?
I've always just went with the concept that none of these cross fit.
Stan
There's No Such Thing As A Cheap Crawler!
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (5045D), 2025 3025E
Useta Have: '58 JD 420c 5-roller w/62 inside blade
Useta Have: '78 JD350C w/6310 outside blade
Useta Have: '68 JD350, '51 Terratrac GT-25
Have: 1950 M, 2005 x495, 2008 5103 (5045D), 2025 3025E
Who is online
Users browsing this forum: No registered users and 41 guests