adjusting clutch throw out bering

[switchhappy]

well being that all u have to do i loosin the bolt a lil.. just use a 3/8drive 1/2 swivel scoket with about a 6 in extension.. u go threw the round hole that is behind your leg.. "the onle that has the screw in beral plug" then when the 1/2 bolt is loosin a few turns, u can then slid the bering to your presure plate.. then re tighten the 1/2 bolt and there u go... just be sure to tape your socket to the extension so u dont drop it in the clutch housing.. .. it took me 10min per side to adjust my 440icd steer clutches.. it easy

[switchhappy]

sorry wrong post.. but i hope i explained that good enough