350 transmission

Post support questions about your JD350 and newer crawler here
Post Reply
Chief510
MC crawler
MC crawler
Posts: 3
Joined: Thu Dec 10, 2020 8:44 pm
Location: Northern WI

350 transmission

Post by Chief510 » Thu Dec 10, 2020 9:16 pm

I bought what I believe is a 350 crawler (serial number gone) that needs transmission work. I cant find a part number for the complete unit, I found a good transmission from a 350 b, are they the same? Both machines have reversers.
Thanks in advance.
My apologies if you have covered this in the past, I did look but didn't come across a thread.

User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 350 transmission

Post by Lavoy » Thu Dec 10, 2020 9:54 pm

There is no part number for a complete unit.
Hard to tell if the b model trans fits if you don't know what model you have.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Chief510
MC crawler
MC crawler
Posts: 3
Joined: Thu Dec 10, 2020 8:44 pm
Location: Northern WI

Re: 350 transmission

Post by Chief510 » Thu Dec 10, 2020 10:00 pm

I am fairly certain it is a straight 350 even though the guy I bought it from said it was a B model. It has power assist steering and it has its own pump mounted on top the engine. As I understand it this was not done on the B model. Also my reverser lever is on the dash on the left side. in looking at pics the B model ha sit on the left arm rest. Any clues if I am on the right track would be helpful.

User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: 350 transmission

Post by Lavoy » Fri Dec 11, 2020 8:29 am

I would agree that it is a straight.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
LeonardL
350 crawler
350 crawler
Posts: 916
Joined: Thu Oct 06, 2011 7:11 pm
Location: Missouri

Re: 350 transmission

Post by LeonardL » Fri Dec 11, 2020 3:20 pm

The transmissions are the same or at least interchangeable. The differences will be in how they were optioned out when first purchased. They will be identical but one or the other may have a reverse gear installed or may have PTO installed. Either way they should work.
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.

Chief510
MC crawler
MC crawler
Posts: 3
Joined: Thu Dec 10, 2020 8:44 pm
Location: Northern WI

Re: 350 transmission

Post by Chief510 » Sat Dec 12, 2020 8:19 pm

Thanks for the help. Monday I will be going to pick up the transmission I found. Hopefully have it back together soon.

Post Reply

Who is online

Users browsing this forum: No registered users and 297 guests