JD 40C tracks

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Drivermanjeff
MC crawler
MC crawler
Posts: 7
Joined: Thu Oct 15, 2020 5:43 pm
Location: Conneautville, Pa.

JD 40C tracks

Post by Drivermanjeff » Thu Oct 22, 2020 3:38 pm

Are the tracks for all 40 series crawlers using the same sprockets. I am asking because I found a set of good tracks off of a 5 roller system,and mine is a 3 roller system. Will they fit my stock setup?
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Re: JD 40C tracks

Post by Lavoy » Thu Oct 22, 2020 11:16 pm

Correct.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
Drivermanjeff
MC crawler
MC crawler
Posts: 7
Joined: Thu Oct 15, 2020 5:43 pm
Location: Conneautville, Pa.

Re: JD 40C tracks

Post by Drivermanjeff » Fri Oct 23, 2020 8:42 am

Thank you Lavoy. I bought those tracks that were from the 5 roller system. Now my 40C will be completely good to use. Just gotta put my pads on his set and shorten them to fit mine. Thanks for your advice. Jeff
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Re: JD 40C tracks

Post by Lavoy » Fri Oct 23, 2020 8:59 am

Have fun.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 12 guests