General help and support for your Lindeman through 2010 John Deere crawler
-
rustycrawler
- 40C crawler
- Posts: 18
- Joined: Sat Oct 07, 2006 8:14 pm
- Location: Gettysburg Pa
Post
by rustycrawler » Thu Apr 19, 2007 8:15 pm
Hello
I know I have seen this question ask on here before,but I was unable to find it. So if someone could help me out. The 420 is a 5 roller with 5 speed trans and a model 90 or 91 loader on it. Im going to try and get the tractor home in the next day or two. The 420 is about 200 miles away from my house. I have been trying to get it home for 6 months now and something always comes up. So I hope to get it home by Saturday. So I can start tearing into it and asking you experts "where do I go from here"?
Thanks for the help.
Wade
-
Lavoy
- Site Admin
- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Apr 20, 2007 7:49 am
WIth a full rack of weights, about 9,000 lbs. Good luck with the trip.
Lavoy
-
rustycrawler
- 40C crawler
- Posts: 18
- Joined: Sat Oct 07, 2006 8:14 pm
- Location: Gettysburg Pa
Post
by rustycrawler » Fri Apr 20, 2007 8:34 pm
Lavoy
There are no counter weights on it. Im leaving at 4 am to pick it up. I will try to post some pics of it. What are the differences between the 40 and the 420? How can you tell them apart from looking at them? I dont think there is a serial number tag on my 420.
Thanks Wade
-
Lavoy
- Site Admin
- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Apr 20, 2007 10:45 pm
40 will not have a water pump, 4 speed only, pretty rare to have a reverser, smaller links and different sprockets than 420.
Lavoy
-
Lavoy
- Site Admin
- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Apr 20, 2007 10:45 pm
40 will not have a water pump, 4 speed only, pretty rare to have a reverser, smaller links and different sprockets than 420.
Lavoy
Who is online
Users browsing this forum: Bing [Bot] and 224 guests
