jd440ICD

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Clydeman
MC crawler
MC crawler
Posts: 2
Joined: Wed Sep 09, 2015 6:18 pm
Location: western NY

jd440ICD

Post by Clydeman » Thu Sep 17, 2015 3:42 pm

HI- new member here - i'm still trying to figure out how to post - here goes again
I recently purchased a jd440ICD. An outside blade, outside mounting support arm, brackets and cylinders came with it. It also has the hydraulics and mounting arms installed for the inside blade(just lacking blade). I have located an inside blade from a jd1010 crawler. Does anyone know if these blades are interchangeable? :?:
Thanx for any info
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Fri Sep 18, 2015 8:21 am

I did it on mine, the only real problem I have is it lifts too high and will hit the front casting so you have to be careful there.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
Clydeman
MC crawler
MC crawler
Posts: 2
Joined: Wed Sep 09, 2015 6:18 pm
Location: western NY

jd440ICD

Post by Clydeman » Fri Sep 18, 2015 9:19 am

Thanks Lavoy for the response
I never considered that. My 440 came with the nose cowl and hood not mounted, so I didn't think about clearances and range of operation.
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 266 guests