Shanks for sale

Parts, Services, and For-Sale
Post Reply
Scottyb
2010 crawler
2010 crawler
Posts: 565
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

Shanks for sale

Post by Scottyb » Mon Mar 18, 2013 10:35 pm

I purchased the 5 shanks in the photos for 250.00 plus freight but they did not fit my ripper. I will send them out freight collect to anyone for the same 250.00 I spent. they need tips welded on but hopefully someone will need them.

I still need a couple of shanks for my 350c if anyone has them. I purchased one from Deere (over 200.00 with clip) but two more would be nice.

Image
Image
Image
Image
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments
Top
User avatar
lurch85
430 crawler
430 crawler
Posts: 95
Joined: Fri Feb 01, 2013 6:11 pm
Location: Upper Peninsula of Michigan

Post by lurch85 » Thu Mar 21, 2013 8:10 pm

do you have the clamps also?
John Deere 420C, John Deere 350 straight with Gafner loader, John Deere 4020
Top
Scottyb
2010 crawler
2010 crawler
Posts: 565
Joined: Sun Sep 25, 2011 7:54 am
Location: Saskatchewan Canada

Post by Scottyb » Fri Mar 22, 2013 6:48 pm

Sorry no clamps. The shanks were custom cut and what you see is all I have. I have 5 of them.
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11108
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Sat Mar 23, 2013 3:43 pm

No clamp used, it is just a piece of strap bent at a 90 Degree angle with a taper on one end.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Top
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sat Mar 23, 2013 7:11 pm

i just used 3/4x3/4 bar stock and welded a bolt/strap across the top and dropped them in.... the 3/4 made up for the wear in the main frame
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Top
Post Reply

Return to “Lavoy's Little Shop O' Deeres”

Who is online

Users browsing this forum: No registered users and 163 guests