Show us pictures of your JD crawler and attachments.
-
Tractor 850
- 430 crawler

- Posts: 83
- Joined: Sun Feb 17, 2008 1:46 pm
- Location: New Jersey
Post
by Tractor 850 » Wed Apr 02, 2008 5:35 pm
Here is a photo of my 440 with what the PA Forestry Dept thought was a ROPS in 1959.
It won't do much good as there never was a seatbelt.
At least I won't be a target for the birds.

Dave
JD440IC Ser#445235 W/ #63 Dozer
Ford 850 Ser#55497 W/Wagner Loader
-
jackhdn
- 420 crawler

- Posts: 39
- Joined: Tue Apr 05, 2005 6:02 pm
- Location: Buckland Massachussets
Post
by jackhdn » Wed Apr 02, 2008 6:19 pm
Nice machine...with a reverser and a three-point...lucky man. Wish the reverser on mine had not been too far gone to fix. I'd worry more about the brush smacking my head then the birds...
Jack
-
Tractor 850
- 430 crawler

- Posts: 83
- Joined: Sun Feb 17, 2008 1:46 pm
- Location: New Jersey
Post
by Tractor 850 » Wed Apr 02, 2008 7:17 pm
Jack,
Thanks for the look.
The reverser is thus far only a lever and a spacer between the clutch and the trans.
The bolt the linkage pivots on was broken off long ago and never fixed.
Someday I will pull the canopy and fenders, as they are all welded together, drill out the bolt, replace the linkage, and see if the reverser will, well, reverse.
The three-point is cool though.
I overlooked a few other flaws when I saw that hitch on the back.
Dave
JD440IC Ser#445235 W/ #63 Dozer
Ford 850 Ser#55497 W/Wagner Loader
Who is online
Users browsing this forum: No registered users and 8 guests