tool carriers on mc

Howard Yoder · Post by **Howard Yoder** » Wed May 10, 2006 7:54 pm

Do these add much value to an MC and are they very hard to find. Also what kind of tools can you put on them the only picture I have seen is one with a set of cultavators.

Post by **Lavoy** » Thu May 11, 2006 8:12 am

A good tool carrier is hard to find, most have been welded and cobbled up.
There were a bunch of attachments for them, probably a dozen or more. I have a 2 bottom plow, and a box scraper. Have seen a disc and one bottom plow.
lavoy

Howard Yoder · Post by **Howard Yoder** » Fri May 12, 2006 7:39 pm

This one has been fliped over to the front and has a blade welded on it. It does have a weld on one side where it has been repaired but the rest of it is in good shape and the mechaniism that lifts it up and down seem to be in really good shape. Thanks for the reply.

Howard Yoder · Post by **Howard Yoder** » Sat May 13, 2006 8:16 pm

Lavoy do you want to sell the plow and the scraper and how much would you want for them? Thanks Howard

Post by **Lavoy** » Sat May 13, 2006 8:56 pm

Howard,
No, too many years of looking to find them.
Lavoy

Howard Yoder · Post by **Howard Yoder** » Sun May 14, 2006 4:16 pm

If you get a chance could you take a piture of them and post them or if there is some where I can see a picture of them lead me to them Thanks Howard

Post by **Lavoy** » Sun May 14, 2006 5:53 pm

Howard,
I do not have them here, sorry. I will try and get a pic or two next time I am at the farm.
Lavoy

Howard Yoder · Post by **Howard Yoder** » Sun May 14, 2006 7:47 pm

Thanks I would Apreciate that.

JDcrawlers Messageboard

tool carriers on mc

tool carriers on mc

Who is online