General help and support for your Lindeman through 2010 John Deere crawler
-
bent
- 440 crawler
- Posts: 113
- Joined: Mon Apr 04, 2005 9:05 am
- Location: Saskatchewan
Post
by bent » Tue Nov 22, 2005 11:08 am
The outside-frame dozer that fits a 440 I think is a 602, I have a chance to get a complete 1010 with an outside-frame dozer, not sure which model the blade is. My question is will this outside-frame blade from a 1010 fit on my 440? Without butchery that is.
Thanks
Brent
-
jdman
- 430 crawler
- Posts: 54
- Joined: Tue Apr 05, 2005 1:09 pm
- Location: Chesaning, Michigan
Post
by jdman » Tue Nov 22, 2005 2:20 pm
Almost Sure There The Same.... I Have A 440 With A 602 And A 1010 With A 602....... I Cant See Any Differents In The Two.... Never Measured Anything Thou...
Jeff
-
Lavoy
- Site Admin
- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Nov 22, 2005 4:05 pm
Brent,
Should bolt right on. Late 1010's had the same style blade as a 602, but it could be tilted as well.
Lavoy
Who is online
Users browsing this forum: No registered users and 13 guests
