1010 diesel cawler loader1964 model boom lift cylinders

[O4Lm0707]

Does anyone know where to get some o-ring kits to rebuild the lift and dump cylinders for I believe the model number 810-812 loader on a 110 crawler Deere says they are no longer available I was able to find kits off ebay for the ripper on back but no luck on the loader cylinders I have a parts manual for the tractor but it does not include the loader parts listing. Also have anyone seen or know where there might be an old 807 blade for a 1010 complete or parts ? I would doubt it being that old but it mounts off the track frame and used the loader frame and an upright bar to raise and lower the blade all manual to angle the blade. Any information on either of these 2 items would be appreciated Thank you in advance!

[Jim B]

Welcome to the Boards.

The loaders and attachments were separate parts catalogs, from the crawler parts catalog, back in the years of your machine. I don't find an 810 or 812 loader in the JD parts catalogs. There was an 831 used on the 440Cs. There is a 1010 loader attachment shown for the 1010 crawler. I have attached a link to the parts catalog for it. There is an ID picture on the first page of the parts catalog you can review to see if it matches yours. Pictures of your loader might help. (You need to use a third-party image hosting site or get with Lavoy on setting up an account on the dedicated picture server for the site. to add pictures into a post here. There is info about the picture server down on the Message Board Q&A and Announcements Board.)

Lavoy, owner and provider of the website, works on and sells parts for these machines. You should call him 701-361-1006 during CST business hours. He might have a source if he doesn't stock the parts.

1010 Loader Parts Catalog PC704