350-B Final Drive

blaisdell's Maple · Post by **blaisdell's Maple** » Sun Feb 02, 2025 10:13 am

I have a week final drive on my 350-b and was wondering if the final drives on a 350 -C would fit the B. I would like to replace them if I could because they are in oil. I have never had a 350-C apart. Thanks,

Post by **Lavoy** » Sun Feb 02, 2025 10:24 am

No, they can not be interchanged.
Lavoy

blaisdell's Maple · Post by **blaisdell's Maple** » Sun Feb 02, 2025 6:30 pm

Are the transmissions the same? I have a 350-c that is for parts and wondered if the inner housings and the finals could be put on a 350-b or do I need to replace the transmission too. thanks

Post by **Lavoy** » Mon Feb 03, 2025 9:15 am

It is significantly more than that, one is dry clutch machine, the other is a wet clutch machine. The parts can not be interchanged.
Lavoy

Stan Disbrow · Post by **Stan Disbrow** » Tue Feb 04, 2025 7:53 am

Hi,

There are enough changes between a JD-350 B and a JD-350C that I really think Deere ought to have called the C the JD-351 instead. Then, they should have called the D the 351B....

Stan

JDcrawlers Messageboard

350-B Final Drive

350-B Final Drive

Re: 350-B Final Drive

Re: 350-B Final Drive

Re: 350-B Final Drive

Re: 350-B Final Drive

Who is online