Discuss non-crawler related issues here (keep it sane, please)
-
Scottyb
- 2010 crawler

- Posts: 565
- Joined: Sun Sep 25, 2011 7:54 am
- Location: Saskatchewan Canada
Post
by Scottyb » Fri Feb 28, 2014 7:55 pm
This was the weekend that I hoped to spend some time on the Deere's.
I was hoping March would be better than February.
This forecast is for tomorrow, March 1st. in degrees c.

Last edited by
Scottyb on Fri Feb 28, 2014 8:25 pm, edited 1 time in total.
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments
-
Scottyb
- 2010 crawler

- Posts: 565
- Joined: Sun Sep 25, 2011 7:54 am
- Location: Saskatchewan Canada
Post
by Scottyb » Fri Feb 28, 2014 7:59 pm
It is cold, the wind is only going to be 10 mph.-+
Last edited by
Scottyb on Fri Feb 28, 2014 8:35 pm, edited 1 time in total.
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments
-
Scottyb
- 2010 crawler

- Posts: 565
- Joined: Sun Sep 25, 2011 7:54 am
- Location: Saskatchewan Canada
Post
by Scottyb » Fri Feb 28, 2014 8:17 pm
Sorry Lavoy, I just looked and we are sending this weather your way....global warming ???
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments
-
Lavoy
- Site Admin

- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Feb 28, 2014 9:21 pm
Colder than hell here. Just saw online that we are only 4 days short of the record as far as days that it got below zero for a particular time frame. Supposed to be in the 20's next week, going to feel like a heat wave.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
-
JWB Contracting
- 2010 crawler

- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
Post
by JWB Contracting » Sat Mar 01, 2014 1:55 pm
It was -40•C this morning when I got out here. Warm enought in the shop, pulling a motor on a Cat D3 LGP.
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
-
Scottyb
- 2010 crawler

- Posts: 565
- Joined: Sun Sep 25, 2011 7:54 am
- Location: Saskatchewan Canada
Post
by Scottyb » Sun Mar 02, 2014 1:04 pm
Jason, you have the right plan, when it is too cold outside, work in the shop. I really need to get my new shop assembled. It is still stacked in the yard but, hopefully this is the summer where I will get it done. In a pickle with the RM as, my lot is restricted to detached buildings maximum 900 ftsq. The rule was put in as most homes in the area are beach front and small lots. I have 9 acres but the rules are the same. I might have to suck it up and only put up half of my shop.
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments
Who is online
Users browsing this forum: No registered users and 150 guests