load from a couple months ago

Post by **Lavoy** » Sun Jul 15, 2012 7:15 pm

Just found this pic on the camera of the 2 440's that came in a while ago. The power 6 way has a tilt seat to match the tilt dozer.
Lavoy

[/img]

whiteclipse16 · Post by **whiteclipse16** » Mon Jul 16, 2012 5:39 am

nice added option with the tilt seat. Looks like it'd be much easier to get on and off of.

Why are there so many different center sections of the grille on the 440? The two pictured are different and both are different than what's on mine.

JD440ICD2006 · Post by **JD440ICD2006** » Mon Jul 16, 2012 6:51 am

Ben,

Lavoy would be the final word on any of this but I only know of two front grills.
The cross hatch style and the later one with round holes and 3 light holes.

Post by **Lavoy** » Mon Jul 16, 2012 8:02 am

The grille on the 6 way is correct for later crawler, the front grille is home made.
Lavoy

whiteclipse16 · Post by **whiteclipse16** » Mon Jul 16, 2012 10:16 am

I figured the 3 hole one was correct. That's what I had seen in the parts book.
My center is a very heavy crosshatch steel. Looks like the same material that is sometimes put over a floor drain trough or something. Kind of hard to explain. No large holes for lights though.

JD440ICD2006 · Post by **JD440ICD2006** » Mon Jul 16, 2012 10:19 am

Ben,

The cross hatch that you describe is what is on them in the original manuals and sales brochures. The other one is a plate with many small holes and 3 larger holes for lights.

JDcrawlers Messageboard

load from a couple months ago

load from a couple months ago

Who is online