Reverser checkout

seffena · Post by **seffena** » Fri Sep 16, 2011 8:40 pm

Hello, I was wandering is there a way to checkout a reverser besides installing it. I know out there one of y'all has figured this out.
Thanks
Keith

pop pop · Post by **pop pop** » Sat Sep 17, 2011 12:23 pm

i think between all of us , we can figure out how to build some reversers ,
might be extensive, but we need them.
i'm going to start the second tuesday of next week ,,

Post by **Lavoy** » Sat Sep 17, 2011 3:48 pm

Disassemble and rebuild.
Lavoy

pop pop · Post by **pop pop** » Mon Sep 19, 2011 6:02 am

haha, well that would be the logical answer but i don't have one to start with.
mine was gutted.
the partsbook isn't much to go on.
i understand how it works, and have seen similar apparatus.
some real nice pictures would be appreciated if anybody has them.
and with work being so slow, i'll throw them at the design shop without telling them what it is and say"we gotta build one of these , only better"..

seffena · Post by **seffena** » Sat Sep 24, 2011 9:54 am

I am rebuilding the reverser, once I get it back together is there a way of making sure it works before I put it back in the frame?

Post by **Lavoy** » Sat Sep 24, 2011 4:31 pm

Not really, you can shift the clutch packs and see that it turns by hand, but none of this is duplicating the power and RPM of an engine.
Lavoy

seffena · Post by **seffena** » Sun Sep 25, 2011 6:09 am

Thanks Lavoy, just wondering if there was a way.

JDcrawlers Messageboard

Reverser checkout

Reverser checkout

reverser

Who is online