59 john deere 430c

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Mon Jul 12, 2010 6:52 pm

http://s877.photobucket.com/albums/ab33 ... 20CRAWLER/

Eric.MacLeod · Post by **Eric.MacLeod** » Mon Jul 12, 2010 7:17 pm

wow what a job!my axles are loose, how bad was it to fix them?

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Mon Jul 12, 2010 8:02 pm

NOT TO BAD EVERY THING WAS APPART ANYWAY.YOU MAY WANT TO ADD SHIMS TO THE BARRING RETAINNING CAP IF ITS NOT TO BAD.I GOT MY BARRINGS AND SEALS THREW NAPA THEY WERE ABLE TO CROSS THE #S.
THE ELIOT SHOW IS THE 24TH THREW THE 26TH WE WILL BE BY THE TRACTOR SEA SAW.HOPE TO SEE YOU THAIR.

JD440ICD2006 · Post by **JD440ICD2006** » Mon Jul 12, 2010 8:14 pm

Absolutley beautiful restoration!

bofts · Post by **bofts** » Sat Jul 17, 2010 12:21 pm

Very nice

JD430C · Post by **JD430C** » Tue Jul 20, 2010 10:40 am

Nice job on that 430. If you want another to do I can drop mine off sometime

.

Andrew

Willyr · Post by **Willyr** » Tue Jul 20, 2010 10:48 am

LOL take a vacation here in Maine and you can help me on mine. haha

Willyr · Post by **Willyr** » Tue Jul 20, 2010 10:51 am

Eric, as long as the axles are still good, it should not be anymore difficult to knock out the old bushings and insert new ones. You can check the axle run out on a wood lathe and some kind of fixture to hold the indicator.

mapaduke@yahoo.com · Post by **mapaduke@yahoo.com** » Thu Jul 22, 2010 5:59 pm

THANKS FOR THE NICE COMMENTS.IT TOOK ABOUT A YEAR TO DO AND A TOTAL OF ABOUT 6 GRAND INCLUDING THE CAUST OF THE CRAWLER.
THANKS TO LAVOY FOR THE PARTS I NEEDID TO HELP WITH THE RESTORATION

A 440 IS NEXT IN THE SHOP .

JD440ICD2006 · Post by **JD440ICD2006** » Thu Jul 22, 2010 6:19 pm

I have to admit that I am partial to the 440C.
Looking forward to seeing your progress on it.

JDcrawlers Messageboard

59 john deere 430c

59 john deere 430c

Who is online