My new 1010 pics

[Lavoy]

A pic of the head, new glow plugs installed, waiting for rebuilt injectors, one pre-cup still to be installed.



A close up view of a pre-cup, the end of the glow plug is at the top of the pic.


A close up of the intake manifold showing the primer nozzle.

[cdndozer]

What year is your 1010 Lavoy?Do you have any pictures of the complete machine?Also what do rebuilt injectors go for? Thanks

[Lavoy]

The tag is gone, but it is an early crawler, 21,900 or under, but has had later fender hyd installed. It is covered in tools right now, and still partially apart. I will get some more pics as it look more like a crawler.
Tips are about $220/each plus labor, so better than $900 for the set. Hopefully they will be done by the end of this week, then it can go back together.
Lavoy

[JD440ICD2006]

Lavoy,

I know all on here share my excitement in you having a new camera. I can't wait to see what all you post.


Chuck

[Lavoy]

Chuck,
I am seriously beginning to wonder about you?!?!?!
Lavoy

BTW, when you coming up for a visit?

[JD440ICD2006]

Lavoy,

I knew that would get your attention!

You have too much snow for me these days.


Chuck W.

[Lavoy]

The more the merrier, kids can't wait until the 1010 is done so I can improve the snow hill the MC is shown on. I about doubled it in size with the nieghbors 3020 after that pic, now just need to go up with it. Poor old MC just doesn't climb like a 5 roller crawler, but it gave it a good try.
Snowing right now, more predicted tomorrow and some later in the week. Hoping the injectors show up by the weekend, they are talking 30 above. That will be a 60 degree swing from what we are expecting tomorrow night.
Lavoy

[Tigerhaze]

We are going to get the same temp swing- but ours is from single digits to 50s. I plan on doing a lot of mechanical work outside this weekend (since I don't have a shop)