I have decided to do one more thing with the Lindeman model and put it in a display case.
I'm thinking of figuring out a way to easily secure this display so someone can't just walk off with it and take it to the tractor shows with me when I show my crawler.
Working on a model of a Lindeman crawler
Re: Working on a model of a Lindeman crawler
Ray
45 John Deere Lindeman ( modified )
46 FMC Bean Cutler ( flat belt drive )
(2) 48 Bolens Ridemasters ser. #R230, #R1051
37 Shaw Du-All tractor conversion
"R/T" home made tractor
1925/26 Centaur tractor conversion
45 John Deere Lindeman ( modified )
46 FMC Bean Cutler ( flat belt drive )
(2) 48 Bolens Ridemasters ser. #R230, #R1051
37 Shaw Du-All tractor conversion
"R/T" home made tractor
1925/26 Centaur tractor conversion
-
- 420 crawler
- Posts: 28
- Joined: Sun Sep 09, 2018 6:00 am
- Location: Fitchburg, Massachusetts
Re: Working on a model of a Lindeman crawler
Ray,
Excellent work on this! Thanks for sharing!
Mike
Excellent work on this! Thanks for sharing!
Mike
Re: Working on a model of a Lindeman crawler
I don't know how I missed this thread.... That is amazing, that is some of the most intricate detail work I've seen done.
JD- 450C track loader
Serial #208336T
Serial #208336T
Re: Working on a model of a Lindeman crawler
Thank you guys .. I appreciate your comments.
Ray
45 John Deere Lindeman ( modified )
46 FMC Bean Cutler ( flat belt drive )
(2) 48 Bolens Ridemasters ser. #R230, #R1051
37 Shaw Du-All tractor conversion
"R/T" home made tractor
1925/26 Centaur tractor conversion
45 John Deere Lindeman ( modified )
46 FMC Bean Cutler ( flat belt drive )
(2) 48 Bolens Ridemasters ser. #R230, #R1051
37 Shaw Du-All tractor conversion
"R/T" home made tractor
1925/26 Centaur tractor conversion
Re: Working on a model of a Lindeman crawler
With the weather getting warmer, I can now get back to work out in the garage and I built this stand to display the model next to my crawler at the tractor shows this year.
The bottom of the base for the model has a pin fastened to it.
This pin fits down thru a hole when it is set on the stand.
A small padlock is attached to this pin to secure the model to the stand.
I have a section of cable and a padlock to secure the stand to something at the shows so no one can just walk off with the whole thing.
The pin can be folded flat, up into the cavity in the base of the model.
This allows the model to be set on a shelf for displaying it at home.
The bottom of the base for the model has a pin fastened to it.
This pin fits down thru a hole when it is set on the stand.
A small padlock is attached to this pin to secure the model to the stand.
I have a section of cable and a padlock to secure the stand to something at the shows so no one can just walk off with the whole thing.
The pin can be folded flat, up into the cavity in the base of the model.
This allows the model to be set on a shelf for displaying it at home.
Ray
45 John Deere Lindeman ( modified )
46 FMC Bean Cutler ( flat belt drive )
(2) 48 Bolens Ridemasters ser. #R230, #R1051
37 Shaw Du-All tractor conversion
"R/T" home made tractor
1925/26 Centaur tractor conversion
45 John Deere Lindeman ( modified )
46 FMC Bean Cutler ( flat belt drive )
(2) 48 Bolens Ridemasters ser. #R230, #R1051
37 Shaw Du-All tractor conversion
"R/T" home made tractor
1925/26 Centaur tractor conversion
Re: Working on a model of a Lindeman crawler
Ray,
That is very nice, great idea for display as well.
Jim
That is very nice, great idea for display as well.
Jim
- Canuck 420c
- 430 crawler
- Posts: 64
- Joined: Sat Jan 30, 2021 4:20 pm
- Location: Milton,Ontario,Canada
- Contact:
Who is online
Users browsing this forum: No registered users and 19 guests