440’s at work

[jimmydiesel]

dtoots1
A 6 way blade is a big advantage if doing more than just pushing material. You could put a blade on your loader frame.

This picture shows my 440IC 831. It has a fork lift attatcment that has the manual 6 way blade from a model 63 dozer adapted to it.



This picture shows a 420 crawler loader with an outside blade operated by the loader hydraulics



I have a 440Ic 831 with a blown engine that will get a 2-53 swapped in and mounts for a 602 dozer added. It will be like the 420 shown above.

[Lavoy]

I have a couple of factory doze4 blade attachments for the loaders.
Lavoy

[jimmydiesel]

For someone that has a crawler loader a blade attachment would be a great attachment to have.

[jimmydiesel]

50 degrees today. Good day to do a little dozing.

440ICD 602.

[Stan Disbrow]

Hi,

Nice!

It is 30 degrees here today and yesterday in NC with high humidity and a Duke's Mixture precip. So, I am doing a different kind of dozing.

Stan

[jimmydiesel]

Warmer than usual weather continues here in the west.

[jimmydiesel]

After sitting for 4 years with the left final drive apart, I finally got this 440ICD 602 3 point hitch back together in November. It has Berco 350 rails (chains) and weld on sprocket rims. The engine is upgraded to “N” series parts. It is a strong runner.
We have put 15 hours on it fixing a few oil leaks and other minor problems. Will be moving it 60 miles to my cousins place so she can fill in and level up around here place.