john deere track loosing problem
-
- MC crawler
- Posts: 4
- Joined: Wed May 02, 2012 7:22 pm
john deere track loosing problem
track problem 450c crawler loader i run the track off the other day, how do you loosen the track, or get that piston to slide into the yoke, i took the bleed screw and grease zerk out and tried to pull it togather with two comealongs and it will not move, what iam i doing wrong, please help THANKS
how rusty is it? it sounds like its froze can you push up against something solid with the loader up .....with a 6 way you can use a block between the blade and the track but you have a loader ......you can use some heat on the tube so it will expand while you are pushing or pulling hope this helps
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Who is online
Users browsing this forum: No registered users and 4 guests