General help and support for your Lindeman through 2010 John Deere crawler
-
doc_dozer
- 40C crawler
- Posts: 17
- Joined: Fri Nov 03, 2006 8:01 pm
- Location: Central Maine
Post
by doc_dozer » Sat Aug 11, 2012 5:47 pm
I finally decided to rebuild the left steering clutch and started to disassemble today.
When I pulled the final drive pinion shaft cover I discovered that the bearing was toast and had chewed up the cover and the pinion shaft.
I pull the whole final and see what other damage there is. I am going to have to go on a treasure hunt....
[/img]
-
LarryD
- 420 crawler
- Posts: 47
- Joined: Tue Apr 03, 2012 12:27 am
- Location: Western NC
Post
by LarryD » Sun Aug 12, 2012 11:51 pm
Almost makes me.afraid to pull the final on my 420 project.
-
Lavoy
- Site Admin
- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Aug 13, 2012 7:59 am
Yeah, I know what you mean, just went through this with both finals on the 440. But, if I hadn't, something would have broken in relatively short order, so just as well do it.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator
www.jdcrawlers.com
-
doc_dozer
- 40C crawler
- Posts: 17
- Joined: Fri Nov 03, 2006 8:01 pm
- Location: Central Maine
Post
by doc_dozer » Wed Aug 15, 2012 4:35 am
That's how I see it too. I'm already almost there so do it right.
Who is online
Users browsing this forum: No registered users and 224 guests
