engine overhaul bo lindeman

[spike]

Aloha I am doing a restoration on abo lindeman.I live on the bib island of Hawaii.What i need is torque specs on rods cylinders head also valve clearance.Do i need to time my oil pump?Where can i get a carb kit? Any help would be greatly appreciated all i have is aparts book for bo lindeman Aloha Spike

[Jimmy in NC]

I don't have the toque specs for a BO but I imagine they are the same as a B. From what I've read and been told all of the motor end should be the same just like the M,40,420,430, etc. wheeled tractors are to the crawlers.

You may find better results looking for that info on the johnnypopper.com website. Just navigate to the message board using the link on the home page.

www.johnnypopper.com

As for the carb kit I think Roberts Carb Repair would be able to get you any parts you need and I think they even have instructional videos if you need that extra bit of insurance.

www.robertscarbrepair.com

You can also call Robert's at (712) 262-5311

Welcome to the board!

Jimmy in NC

[Lavoy]

Spike,
I can get a carb kit, they are not spendy.
I should have an I & T manual with torque specs, I will see if I can find it.
Lavoy

[spike]

Aloha thanx LavoyIam putting it together today .How much is acarb kit? Spike Aloha

[Lavoy]

B carb kit is $25 with throttle shaft, gaksets, needle and seat. Not sure if I can get throttle shaft bushings anymore, but can check if you need them. I do need to know the carb number, there are 3 different kits.
Lavoy

[spike]

Aloha Lavoy Carb# dltx10 .Cast# on carb body .Any luck on torque Specs ? Let me know Carb kit cost + shipping& i will send $.Mahalo Spike

[Lavoy]

Spike,
Carb kit is no problem, take me a few days to get, $32.70 with freight.
Rods are 62 lbs
Head bolts are 96 lbs, 104 if you have the dark, heat treated studs.
Valves are .020 hot.
Lavoy

[spike]

Thanks Lavoy.

Yes I want the carb kit.

Spike

[Lavoy]

I will order it in the morning.
Lavoy