General help and support for your Lindeman through 2010 John Deere crawler
-
NNAATZ
- 1010 crawler
- Posts: 296
- Joined: Fri Oct 13, 2006 7:16 am
- Location: austin,mn
Post
by NNAATZ » Wed Apr 25, 2007 8:12 am
i was use my 420 last week end and after a while the right track was getting more difficult to brake, i stoped, then got it up to the truck to take off the adjustment on top and seen oil on the drum and band. the cluthes were not slipping. i see in the book that there is a seal in top small gear in the drives, but dont see one diff side. is there one? what is the part # for the both seals? probly need a band too.
nick
-
Lavoy
- Site Admin
- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Wed Apr 25, 2007 8:19 am
Nick,
Yes, there is one in the final drive case, and one in the transmission case, it could be either one. Best to get it torn apart before the clutches get soaked with oil and ruined. I have brake bands on hand, probably have both seals on hand as well.
Lavoy
-
NNAATZ
- 1010 crawler
- Posts: 296
- Joined: Fri Oct 13, 2006 7:16 am
- Location: austin,mn
Post
by NNAATZ » Wed Apr 25, 2007 8:24 am
ok could you thow them on the trailer for this sat.
thanks nick
Who is online
Users browsing this forum: No registered users and 251 guests
