General help and support for your Lindeman through 2010 John Deere crawler
-
Howard Yoder
- 1010 crawler
- Posts: 353
- Joined: Mon Apr 04, 2005 6:53 pm
- Location: Columbus Ohio
Post
by Howard Yoder » Sun Jun 18, 2006 8:17 pm
Lavoy check out this 440 on e-bay I have never seen a 440 with the throtle in the middle of the dash like this one. Item #7629290097 if this was closer I would be interested in it because it appears to be in decent shape.
-
Lavoy
- Site Admin
- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Jun 19, 2006 9:05 am
If you ever see me refer to a "center throttle" 440, that is what I am referring to. The very last 440's had this throttle design. They also have 1010 final drive cases and sprockets, as well as different axles and different steering clutches.
Lavoy
-
BKahler
- 440 crawler
- Posts: 175
- Joined: Mon Apr 04, 2005 9:38 pm
- Location: Richmond, Kentucky
-
Contact:
Post
by BKahler » Mon Jun 19, 2006 8:21 pm
Mine is the later style 440. I hadn't realized the finals were like the 1010 crawlers. Thats good to know!
Brad
-
sam
- 420 crawler
- Posts: 33
- Joined: Mon May 29, 2006 12:43 pm
- Location: La
Post
by sam » Mon Jun 26, 2006 3:46 pm
Well I,m confused now I"m right in the middle of rebuilding a final drive on my late 60 production 440 icd. It needs a new or a less worn axle. How can you tell the differents?
-
Lavoy
- Site Admin
- Posts: 11108
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Mon Jun 26, 2006 4:27 pm
I do not remember the measurements for sure, but a 1010 axle is something like 1/2" longer than a late 440 axle.
Lavoy
Who is online
Users browsing this forum: No registered users and 198 guests
