JDcrawlers Messageboard

Working through this new to me 440ICD. The 831 loader is sloppy with a lot of play at the lower bushing on the forward bell crank. I pulled the out big bolt that holds the arm to the bushing. The bushing seems tight, but there is side to side slop. I see shims on the inside between the bolt with was...

I'm working through a "new to me" 440ICD loader and getting it ready to go to work on a land clearing project. I've got the old girl up on timbers and I'm inspecting the undercarriage. I'm very pleased with what I've found and was surprised to find that the track rollers are sealed units. The track ...

Follow up post on filter mounting. First action was trying to service the oil bath air filter. I quickly dropped the base a spread 1/2 quart of really nasty oil on the floor. I couldn't imagine retrieving the filter base if I had the belly pans on. The service interval is every ten hours and I'll dr...

Thank you for taking the time to post these photos. Just what I needed. Will post up a pic of my remote filter set up once I get it plumbed.

Mike P.

New owner on a 440ICD with loader. Runs and moves. Got the belly pans off, it looks like a pretty solid unit. Replacing all hydraulic hoses and fluids, missing bolts, etc.. It will go to work on our TN property this summer. I've found several old posts where people have "missing" oil filters. I find...