JDcrawlers Messageboard

i have compared the two hubs that i have for the steering clutch and found that the hub that has both casting numbers on it is slightly taller than the hub with only the casting number indicating it is for the 450. i have bolted the new pressure plate onto it and adjusted the fingers, they measure 1...

i have pulled the steering clutch assembly back out and have a new pressure plate, while i have it out i am checking all the disks to make sure they are clean and also checking part numbers to make sure all the parts are correct. i have found that the part number cast onto the center hub is for a st...

the disks are all new and free of oil on them, i even made sure that i put the first disc under the snap ring on the center drum then alternated steels and frictions since the springs could be weak do i need to pull the steering clutch assembly back out to change them or can i do it in the dozer? wo...

i am currently working on a JD 450b. it came to me with a few different issues, i have installed a new trans pump and input shaft because the pump was leaking and had raan dry on several occasions resulting in the pump gears cutting into the pump housing and the bearing that the input shaft rides on...