JDcrawlers Messageboard

I have a straight 350 that I am trying to get the left steering lined out on. I have adjusted the clutches and brake per the manual. When I drive the dozer forward and pull on left stick it will slowly start to turn. When I drive in reverse and pull the left stick the track locks up and it turns on ...

Also yesterday after I pulled the fuel filters and re installed them the engine would start and idle but when I increased the throttle it would rev up a few hundred rpm but wouldn't go any higher. Even If I move it to full throttle it would just rev up a little over idle.

It does bog down in both forward and reverse. I haven't seen any color change in the exhaust but it exits over the top of the cab so I might not notice. The engine has a very slight loping sound at idle. I went to change the fuel filter yesterday but I had the wrong filter so I will get the right on...

I have a straight 350 dozer we purchased about a month ago. Everything has been running fine other than the right side has no steering at times. I have adjusted per the manual but need a brake band. The problem I am having now after running for about 4 hours yesterday it seemed like it lost power un...

I am in the process of adjusting the brake band on my 350 dozer. In the manual it says to "tighten the brake band adjusting screw clockwise until snug, ending with the screw on the flat portion of the lock and not in the detent position." What is the flat portion of the lock and what do they mean by...

Thanks

I recently purchased a 350 that came with a 3315 winch. I was wondering if anyone new the pulling capacity of the winch and what size cable/how much the spool holds.


Thanks