JDcrawlers Messageboard

Has anyone rebuilt the six way blade control valves.This is the last leaking that I have on my machine. Still works fine but there is always some weeping under the valve body. With the help of someone from here last year I found the parts manual for the 622 blade with a good blowup of the valve. Mos...

Does anyone no the number or if one even exists, for a rebuild kit for the six-way valve on a 2010. It is the 622 blade setup. My dealer thinks he can get MOST of the parts one by one, but he also thought there should be a kit but could not find a number. Any help would great, thanks in advance Paul...

I don't want to tell you what to do, as you seem to have a good plan. I did what you did last year exept I also did a complete rebuild on the engine. I found a blast cabnet to be my best friend. I got a few diffrent types of media (plastic beed, walnut shell, etc). After taking things apart they wen...

If you go to your local parts store and ask for HEADER paint you will be all set I think it is good for 1500 degrees and if you blister that you have other problems ie to lean.. Paul

Here are a few steps to try. The first would be as stated earlier, remove the plug at bottom and gas should STREAM out. This would be and open circuit and gas should come out just as if the line from the tank was cut.If it does not here is what I would do. Go to local parts store and get a cheap gas...

I do not believe in snake oil, BUT, here is a true story I seen with my own eyes. Friend brought me a 2010 with the same problem. I chased down parts, and gave him a price, he said he could not do it then and would have to wait. The next day he came over with a product called Blue Devil I believe. I...

I have the same unit and like mine so well I rebuilt it this winter. For what you are looking to do it will work well.Parts are getting tough to get but it can still be done. It will do a lot more then your tractor... Paul

Hey I would just like to say THANKS for all the help. We are so lucky to have each other... I went to my dealer before this topic and he looked at me like I had three heads (young guy, old dealer). I went back after all this info with parts numbers in hand, all though most #s had to be updated, and ...

Ok I guess the next question is where might I find the number or model for the blade. I am sure it was put on new as I bought this from the original owner who is long since passed. It is a 6foot 6 way inside blade...

Does anyone know where I can find a service,parts,or just a blow up, for the control valve on a six way blade. I have a 2010 with 6way and it is leaking 8 ways. I have parts and service manuals for machine but there is nothing on this area. I have a good shop in the area that feels they can come up ...

Does anyone know a good place to get the rebuild kit for a 2010 gas crawler water pump??? Paul

I did both of my clutches last fall here is what I did.I did not remove final. I pulled tracks, removed sprockets,there is a three bolt cover that goes over pinion to remove. Take off the inspection plate over clutches, unhook brake and remove top casting of clutch house. Go back to pinion and with ...

Does anyone know the right kit for the marvel schebler carb on the 2010.
Needles to say the tag was removed from mine. Thanks Paul

Would you just mag the sleeves and deck to check for cracks or is there something more common that I should be looking for. I had planned on a rebore anyways as it would seem unlikley that the cylinders would be round and unscarred. Are the kits something you sell? and if so what is in them and how ...

I have a 2010 gas crawler with 6way that has been a great machine but is now in need of help. The engine is starting to get a little tired and I am going to rebuild. I have done hundreds of rebuilds but for the most part for racing engines.I was wondering if anyone has done one of late and where the...