JDcrawlers Messageboard

Sorry, turbo line has junction block. Steel line coming from engine to it then pressure hose on to turbo. think not restrictive enough to read pressure right. Should have application for sending unit with turbo to get right reading but where? Also - don't be confused by hose size - a hose doesn't h...

What is the pressure you are getting cold idle?

Where mid-way in block?
You must tap into oil gallery before the bearings.
And "tapping" is extremely risky because any drill shavings will go directly into the first downstream bearing.
Why not just tee into the turbo oil feed?

Did you see that custom "red" TD14 out back with Bucyrus blade??
I know its not green/yellow, but sure is a nice machine.

Well, I had good luck with my last request, so I thought I'd look for leads on a service manual.
Anyone know where to get one?
-Jim

Well - have to thank you again, Ken. Just got back from PB&H. I got a BRAND NEW OLD STOCK rops for my 450 loader for an incredibly reasonable price. I also got triple grousers for my 350 (almost new, no shoulder wear even) for an equally fair price. For anyone interested - he still has a NOS 350 loa...

The hole is usually in Westchester or CT.
So that should work beautifully!
Thanks pal.

I am still looking for a 450B loader ROPS or EROPS.
We use this machine every day hard, and I am a little nervous.
Any help is most appreciated.
Thank you. - Jim

I have a good backhoe for a 450 (#913) that I would like to trade for a decent winch for my 450 loader.
I never use the backhoe because I have a 30 ton Cat and a 15 ton Komatsu shovel.
It just sits here against the tree irritating my wife.

Please e-mail me at:
artisticmason@comcast.net

Thanks, man.
That is the compromise I was suggesting to my old man.
Maybe I have to remove tank assembly and main top of housing might allow enough elbow room.

Hi guys - new here. Found the link on HEF. I did search thoroughly in the archives for answer to the following problem... Any of you guys know, if it is at possible to adjust pressure plate finger tension on JD 450B through inspection hole?? Machine slips slightly on left and it is on a job and I do...